How to Reconnect a Ring Doorbell

Thomas S. Tucci

If your Ring Doorbell is not working, you may need to reconnect it. To do this, follow these steps:1. Go to the device settings in the Ring app and select your doorbell.

2. Select “Remove Device” and confirm that you want to remove the doorbell. 3. Press the setup button on your doorbell for 30 seconds until it flashes blue. 4. Go back to the device settings in the Ring app and select “Set Up A New Device.”

5. Follow the prompts to connect your doorbell to Wi-Fi and finish set up.

  • If the Ring Doorbell is not connecting to the internet, here are a few steps to try in order to reconnect it:1
  • Check that the power supply is properly connected and that the doorbell has enough power
  • If it’s low on battery, try charging it for a few hours
  • Press and hold the orange button on the back of the doorbell for 20 seconds, then release it
  • This will reset the connection between the doorbell and router
  • Check your router settings to make sure that it’s broadcasting a 2
  • 4GHz signal (most routers do this by default)
  • If not, you’ll need to enable that setting in order to connect your devices
  • Once you’ve checked all of these things, try connecting again and see if it works!

How Do I Reset My Ring Doorbell Wi Fi?

If you need to reset your Ring Doorbell WiFi, here’s how:1. First, make sure that your router is powered on and working properly. 2. Next, locate the small recessed button on the back of your Ring Doorbell.

You will need a paperclip or similar object to press this button. 3. Press and hold the button for approximately 15 seconds or until you see the LED light on the front of the doorbell begin flashing blue. This indicates that the device is in factory reset mode.

4. Once the light starts flashing blue, release the button and wait for the doorbell to restart and reconnect to your WiFi network automatically. This process can take up to 2 minutes. 5. That’s it!

Why Can’T I Reconnect My Ring Doorbell?

If you’re having trouble reconnecting your Ring Doorbell, there are a few things you can check. First, make sure that the batteries in your Doorbell are charged. If they’re not, charge them for at least 24 hours before trying to reconnect.

Next, check your internet connection. If you’re using a cellular data connection, make sure you have strong signal strength. If you’re using Wi-Fi, try moving closer to your router or extending the range of your Wi-Fi with a mesh system or range extender.

Once you’ve checked those things, try restarting both your Doorbell and your router. To do this, simply unplug both devices for about 30 seconds and then plug them back in again. Once they’ve booted back up, try connecting your Doorbell again.

If you’re still having trouble after all of that, contact Ring support for further assistance.

How Do I Connect My Ring Doorbell to My Wifi?

If you’re looking to connect your Ring Doorbell to your home wifi network, there are a few simple steps you’ll need to follow. First, open up the Ring app on your smartphone and sign in with your username and password. Once you’re logged in, tap on the “Devices” tab at the bottom of the screen.

From here, find the doorbell that you want to connect to wifi and tap on it. On the next screen, tap on “Network Settings” and then select “Wireless Network”. Now simply enter in your wifi network’s SSID and password and hit “Connect”.

That’s it! Your Ring Doorbell should now be connected to your home wifi network.

How Do I Reconnect My Door Ring Chime?

If you’ve recently moved and need to reconnect your Ring Chime, follow these quick and easy steps. First, remove the faceplate from the bottom of the device by pressing down on the tab and pulling it off. Next locate the small port labeled “Chime” towards the top of the doorbell.

Using a paperclip or other small object, press and hold the reset button for 20-30 seconds. After a few seconds have passed, you should hear a chime indicating that your Chime has been reset. Finally, reattach the faceplate and screw it in place.

That’s it! Your Ring Chime is now ready to be connected to your new home’s Wi-Fi network.

Quick Fix: Ring Doorbell Loses WiFi Connection

Change Ring Doorbell Wifi Without Removing

If you need to change the WiFi network that your Ring Doorbell is connected to, but don’t want to remove it from its current location, there’s an easy way to do it. Here’s how:1. Open the Ring app on your mobile device.

2. Tap the “Menu” icon in the top-left corner of the screen (it looks like three horizontal lines).3. Select “Devices” from the menu that appears.4. Find the Ring Doorbell you want to modify and tap on it.

5. Scroll down and tap “Change WiFi Network.”6. Enter the new WiFi network information and tap “Connect.”And that’s all there is to it!

Ring Doorbell Not Connecting to Phone

If you’re having trouble connecting your Ring Doorbell to your phone, there are a few things you can try. First, make sure that the app is up to date. Next, check that your phone’s Bluetooth is turned on and that it’s in range of the doorbell.

If those things are all set, try restarting both your phone and the doorbell.Still having trouble? There are a few other things you can try.

First, check to see if there are any firmware updates available for your doorbell. If there are, follow the instructions on how to update the firmware. Next, try resetting your doorbell by pressing and holding the button on the back of the device for 20 seconds.

Finally, if none of these solutions work, you may need to reach out to Ring’s customer support for help troubleshooting the issue.

How to Reconnect Ring Doorbell to New Wifi

If you’ve recently changed your home WiFi network and find that your Ring Doorbell is no longer working, don’t worry! It’s easy to reconnect your device to the new network. Here’s how:

1. Open the Ring app on your mobile device. 2. Tap on the three lines in the top left corner of the main screen, then select “Devices.” 3. Find your doorbell in the list of devices and tap on it.

4. Scroll down and tap on “Network Settings,” then select “Reconnect to WiFi Network.” 5. Enter the password for your new WiFi network, then tap “Connect.” 6. That’s it!

Ring Doorbell Not Connecting to Wifi During Setup

If you’re having trouble connecting your Ring Doorbell to your home’s Wi-Fi network during setup, there are a few things you can try.First, make sure that your router is on and broadcasting a signal. If it’s not, restarting it may help.

Next, check to see if your doorbell is too far away from your router. If it is, try moving it closer or using a range extender.Finally, if you’re still having trouble, there may be something wrong with your doorbell itself.

In this case, you’ll need to contact customer support for assistance.


If your Ring Doorbell is disconnected, you can easily reconnect it by following these steps:1. Make sure that your doorbell is powered on and within range of your WiFi network.2. Open the Ring app and tap on the “Devices” tab.

3. Select your doorbell from the list of devices and tap on the “Reconnect” button.4. Follow the prompts to complete the reconnection process.

  As an Amazon Associate, I earn from Qualifying Purchases.

Leave a Comment