How to Install Wedge on Ring Doorbell

Thomas S. Tucci

Installing a Ring Doorbell is easy and only takes a few minutes. But if you want to get the most out of your investment, you should also install a Wedge. A Wedge allows you to adjust the angle of your Ring Doorbell so that it has a better view of your front door.

It’s also helpful if you have an unusual door setup or live in an apartment complex where the normal installation might not work.

  • Out of the box, remove your new Ring Doorbell and Wedge Kit
  • With the included screws, mount the Wedge to the bottom of your Ring Doorbell
  • Connect your Ring Doorbell to the battery and screw it in place
  • Now that your Ring Doorbell is mounted with the Wedge, download the latest version of theRing app and follow instructions for connecting a new device
How to Install Wedge on Ring Doorbell

Credit: ring.com

How Do You Install a Ring Doorbell Angle Bracket?

If you want to install your Ring Doorbell at an angle, you’ll need to use an angle bracket. Here’s how to do it:1. Start by attaching the angle bracket to the bottom of your Ring Doorbell using the provided screws.

2. Next, use the screws to attach the bracket to your chosen surface. Make sure that the bracket is level and that there’s enough space for the doorbell to swing freely when someone presses the button.3. Once everything is in place, slide your Ring Doorbell onto the angle bracket and tighten it into place using the provided screws.

And that’s it! Your Ring Doorbell is now installed at an angle, allowing you to get a better view of whoever is at your door.

Should I Use the Wedge on Ring Doorbell?

If you’re considering using the wedge on your Ring Doorbell, there are a few things you should know. First, the wedge can be used to adjust the angle of your doorbell camera. This can be helpful if you want to change the view that your camera has or if you need to adjust for a different mounting location.

Additionally, the wedge can be used to make sure that your doorbell is level. This is especially important if your doorbell is mounted on an uneven surface. Finally, using the wedge can help protect your doorbell from being damaged by wind or rain.

How Do You Install a Ring Doorbell Pro 2 Wedge Mount?

If you have a Ring Doorbell Pro 2 and want to install it using the wedge mount, here are the steps you need to follow. Keep in mind that you will need a drill and some basic tools for this installation.1. Start by holding the wedge mount up to the location where you want to install it.

Use a level to make sure it is straight. Once you have found the perfect spot, use a pencil to mark the four drill holes. 2. Drill pilot holes into the marks that you made.

Be careful not to make them too big – they should be just big enough for your screws. 3. Insert the screws into the pilot holes and tighten them until the wedge mount is secure.

How Do You Install a Ring Bracket?

Installing a ring bracket is a relatively easy process that can be completed in just a few minutes. The first step is to determine the location for the bracket. It is important to choose a spot that is strong and sturdy enough to support the weight of the curtain, as well as one that will allow the curtain to hang freely without hitting anything.

Once the location is chosen, mark the spot with a pencil or pen.Next, using a drill and screwdriver, create pilot holes in the marked spots. Once all of the pilot holes are created, insert screws into each one and tighten until they are snug against the wall.

Be careful not to over-tighten them, as this could strip out the threads or damage the drywall.Finally, slide your ring bracket onto each screw head and hand-tighten until it is secure. That’s it!

You should now have a fully installed ring bracket that is ready to hold your curtains!

How To Install A Ring Video Doorbell Wedge Kit On New Or Existing Ring Doorbell

How to Install Ring Doorbell 3 Corner Kit

If you’re looking to install a Ring Doorbell 3 Corner Kit, here’s what you’ll need to do:1. First, gather the tools and materials you’ll need: a screwdriver, drill, level, tape measure, hammer, and the included screws and wall anchors.2. Next, find the perfect spot for your doorbell by holding it up to your doorframe and marking where the holes line up.

Once you’ve found the perfect spot, use a level to make sure it’s straight.3. Now it’s time to start drilling! Begin by making a pilot hole with a small drill bit (we recommend 1/8″). Once your pilot hole is drilled, switch to a slightly larger drill bit (we recommend 3/16″) and finish drilling through the hole.

Be careful not to overdrill!4. Time to install the wall anchors. Using a hammer, gently tap each wall anchor into place until it’s flush with the surface of the doorframe.

You may need to use a little more force for harder surfaces like brick or concrete.5a. If you’re using ring screws: insert each ring screw into one of the pre-drilled holes until it’s snug against the wall anchor behind it (do not overtighten).

5b If you’re using traditional screws: first thread each traditional screw into a wall anchor until it’s snug against the back of the anchor; then insert each assembly into one of the pre-drilled holes until tight against the wall surface behind it (again – do not overtighten). 6a For both types of installation – now that all four screws are in place – use your phone or another device equipped with Bluetooth®to connect directly to your new Doorbell 3 while standing within range (approximately 10 feet). The LED light on your Doorbell will flash blue indicating that it’s in pairing mode; open up your Ring app and follow instructions within “How To Install Your New Device” section under “Devices” tab on bottom toolbar.

. If successful ,you should see video feed from device . 6b If unsuccessful : remove all 4 screws & re-insert only 2 at top or bottom corners again following step 5 – this time taking care not ensure they are lined up perfectly vertically before tightening ; once done , retry step 6a .

Conclusion

If you have a Ring Doorbell, you may be wondering how to install the Wedge. The Wedge is a small piece of plastic that fits over the doorbell, and it helps to make the doorbell more visible from the street. It’s easy to install, and it only takes a few minutes.

Here’s what you need to do:1. Remove the battery cover from the back of the Ring Doorbell.2. Insert the batteries into the Ring Doorbell (make sure they are fresh or new).

3. Put the battery cover back on.4. Take the Wedge out of its packaging. There are two pieces – a top and bottom piece.

Place them both over the doorbell (the top piece goes on first). Make sure that they are snug and fit tightly against each other – you don’t want any gaps.

  As an Amazon Associate, I earn from Qualifying Purchases.

Leave a Comment