How to Install Ring Doorbell on Siding Without Drilling

Thomas S. Tucci

If you’re looking to install a Ring Doorbell on your siding without drilling, there are a few things you’ll need to do. First, find the studs in your siding using a stud finder. Once you’ve found the studs, mark them with a pencil so you know where to drill.

Next, use a drill bit that is slightly smaller than the screws that come with your Ring Doorbell to make pilot holes in the siding. Finally, insert the screws into the pilot holes and tighten them until the Ring Doorbell is secure.

HOA Approved NO screw holes Ring Video Doorbell and Ring Solar Charger Vinyl Siding Mount

  • Choose a location for your Ring Doorbell
  • It’s important to pick a spot that’s within range of your WiFi network and where the doorbell will get good enough sunlight to charge its battery
  • Once you’ve found the perfect location, use the included mounting bracket to attach your Ring Doorbell to the siding
  • Make sure the doorbell is level, then use the provided screws to secure it in place
  • Use the Ring app on your smartphone to connect your doorbell to WiFi and finish the installation process

No-Drill Doorbell Mount

If you’re looking for a quick and easy way to install your doorbell, look no further than the No-Drill Doorbell Mount! This mount attaches to your door without the need for any tools or drilling, making installation a breeze. Plus, the sleek design ensures that your doorbell will always look its best.

How to Install Ring Doorbell on Siding Without Drilling


Can You Install Ring Doorbell Without Drilling?

Yes, you can install Ring Doorbell without drilling. There are a few methods you can use to do this, including using double-sided tape or mounting brackets. We’ll go over a few of the most popular methods below.

One popular method is to use double-sided tape. This will allow you to mount your Ring Doorbell onto any flat surface without having to drill any holes. Simply clean the surface area where you want to mount the doorbell, then apply the double-sided tape and press the doorbell into place.

Make sure that you wait at least 24 hours before using your doorbell so that the tape has time to set properly.Another common method is to use mounting brackets. These brackets will typically come with your Ring Doorbell and can be found online or at most hardware stores.

To install, simply screw the bracket into place on your chosen surface (again, make sure it’s flat), then snap your Ring Doorbell into the bracket.No matter which installation method you choose, make sure that your Ring Doorbell is placed in an area where it will have a clear view of whoever is approaching your door so that it can record them properly.

How Do I Attach a Ring Doorbell to Vinyl Siding?

Ring Doorbells are one of the most popular home security devices on the market. If you’re looking to add a Ring Doorbell to your home, you may be wondering how to attach it to vinyl siding. Luckily, attaching a Ring Doorbell to vinyl siding is relatively easy and can be done in a few simple steps.

First, you’ll need to purchase the appropriate mounting bracket for your Ring Doorbell. Be sure to select a bracket that is specifically designed for use with vinyl siding. Once you have the bracket, simply position it on the vinyl siding where you want your Ring Doorbell to be mounted.

Using the provided screws, secure the bracket in place.Next, take your Ring Doorbell and line up the two holes at the bottom of the device with the two posts on the mounting bracket. Again, using the provided screws, tighten down the Ring Doorbell until it is securely attached to the bracket.

That’s it! You’ve now successfully mounted your Ring Doorbell to vinyl siding.

Can I Use Command Strips for My Ring Doorbell?

If you’re looking for an easy way to install your Ring Doorbell, Command Strips might be the way to go. Here’s what you need to know about using them.What are Command Strips?

Command Strips are a type of adhesive that can be used to hang up various items around the home. They’re popular because they’re easy to use and don’t damage walls or surfaces.Can I use them for my Ring Doorbell?

Yes, you can! In fact, many people choose to use Command Strips for their Ring Doorbells because it’s an easy and convenient way to install it. All you need to do is adhere the strips to the back of your doorbell and then press it firmly against the wall or surface where you want it installed.

That’s it! The doorbell will then stay in place until you decide to remove it (which is also very easy to do).Are there any downsides?

The only potential downside of using Command Strips is that they may not work as well on very smooth or slippery surfaces. If your doorbell is going onto a surface like this, we recommend testing out the strips first before committing to them. Other than that, there aren’t really any other cons when it comes to using these strips!

Can You Attach a Ring Doorbell to Siding?

If you’re looking to add a little extra security to your home, installing a Ring Doorbell is a great option. But if your home has siding, you might be wondering if you can still install the doorbell. The good news is that yes, you can attach a Ring Doorbell to siding.

Here’s what you need to know about attaching your new doorbell:There are a few things to keep in mind when attaching a Ring Doorbell to siding. First, make sure that the area where you’ll be attaching the doorbell is clean and free of debris.

This will help ensure that the adhesive strips have a strong hold. Next, use the included drill bit to make pilot holes in the four corners of the mounting plate. Once the pilot holes are drilled, remove the protective backing from the adhesive strips and affix them to the corners of the mounting plate.

Finally, line up the mounting plate with the appropriate location on your siding and screw it into place using the provided screws.That’s all there is to it! Attaching a Ring Doorbell to siding is easy and only takes a few minutes.

With your new doorbell in place, you can enjoy increased peace of mind knowing that your home is better protected against intruders.


There are a few different ways that you can install your Ring Doorbell on siding without drilling, and the method that you choose will depend on the type of siding that you have. If you have brick or stone siding, then you can use adhesive strips or mounting tape to attach your doorbell. If you have vinyl siding, then you can use zip ties or specially-designed brackets to secure your doorbell in place.

No matter what type of siding you have, there are a few things that you need to keep in mind when installing your Ring Doorbell. Make sure that the surface is clean and dry before attaching anything, and be sure to follow all instructions carefully so that your doorbell is installed correctly and securely.

  As an Amazon Associate, I earn from Qualifying Purchases.

Leave a Comment