How to Adjust Sensitivity on Ring Doorbell 2

Thomas S. Tucci

If you find that your Ring Doorbell 2 isn’t picking up motion as well as you’d like, or if you’re getting too many false alerts, it’s easy to adjust the sensitivity. Here’s how:First, open the Ring app and go to your device settings.

Then, select Motion Settings. From there, you can use the slider to adjust the sensitivity. If you want to fine-tune it even more, you can also enable or disable specific types of motion detection, like people, cars, or animals.

Once you’ve got your settings just the way you want them, be sure to test it out to see if it’s working better for you. And that’s all there is to it!

  • Download the Ring app and create an account
  • Tap the three lines in the top left corner of the main screen
  • Scroll down and select “Devices
  • Select your device from the list that appears
  • Tap “Device Settings
  • Select “Motion Settings
  • Use the slider to adjust your motion sensitivity settings
How to Adjust Sensitivity on Ring Doorbell 2

Credit: www.youtube.com

Can You Adjust Sensitivity on Ring Doorbell?

Yes, you can adjust the sensitivity of your Ring doorbell. To do so, open the Ring app and go to your device settings. Then, select “Motion Settings” and choose the sensitivity level that you prefer.

How Do I Adjust the Sensitivity of My Ring Camera?

If you’re looking to adjust the sensitivity of your Ring camera, there are a few things you’ll need to take into account. First, you’ll need to decide what type of sensitivity you want to adjust: motion detection or sound detection. If you want to adjust motion detection, you can do so in the “Motion Settings” section of the Ring app.

Here, you can choose to have your camera detect people only, or people and vehicles. You can also customize how far away from the camera objects must be before they’re detected, and how long an object must be in view before it’s considered as part of an event. If you want to adjust sound detection, you can do so in the “Sound Settings” section of the Ring app.

Here, you can choose how sensitive your camera is to sounds around it. There are four levels of sensitivity: Low (least sensitive), Medium, High and Max (most sensitive). You can also choose whether or not you want your camera to record audio along with any events that are triggered by sound detection.

How Do You Adjust the Motion Sensor on a Ring Doorbell?

There are a few things you need to do in order to adjust the motion sensor on your Ring doorbell. First, you need to go into your device settings and make sure that the “Motion” setting is turned on. Next, you will need to go into the “Advanced Settings” menu and adjust the sensitivity of the motion sensor.

You can also set up custom zones for the motion sensor, which allows you to specify areas where you do or do not want the doorbell to detect motion. Finally, if you want to be extra careful, you can enable the “Motion History” feature, which records all instances of motion detection and saves them so that you can review them later.

Why is My Ring Doorbell So Sensitive?

If you’re noticing that your Ring doorbell is especially sensitive, there are a few possible explanations. First, it’s important to check and make sure that the sensitivity settings in the app are set to your liking. You can access these settings by opening the app and going to the Device Settings menu for your specific device.

From there, you should see an option for “Motion Zones.”Next, take a look at where your Doorbell is mounted. If it’s mounted too low, objects passing by in close proximity could trigger the motion sensor.

try raising it a few inches and seeing if that makes a difference. Finally, check to see if there are any light sources near your Doorbell that could be reflecting off of something and causing false positives. If all else fails, reach out to Ring support for help troubleshooting!

Stop Annoying Ring Alerts !! How to customize Ring Doorbell Motion Sensitivity Zones 2021

How to Adjust Sensitivity on Ring Doorbell Pro

If you’re the proud owner of a Ring Doorbell Pro, congratulations! You’ve got your hands on one of the most popular and well-reviewed doorbells on the market. But even the best doorbells need a little bit of tweaking from time to time, and that’s where adjusting the sensitivity comes in.

There are two main reasons why you might want to adjust the sensitivity of your Ring Doorbell Pro. The first is if you’re finding that it’s triggering too often, for example, when cars drive past or animals walk by. The second is if it’s not triggering enough, and you’re missing visitors or deliveries.

Luckily, adjusting the sensitivity is a relatively straightforward process that only takes a few minutes. Here’s how to do it:1. Open up the Ring app on your smartphone or tablet.

2. Tap on the “Devices” tab at the bottom of the screen.3. Select your Ring Doorbell Pro from the list of devices.4. Tap on “Device Settings.”

5 .Scroll down to “Motion Settings.” Here you’ll see three different options for sensitivity: Low, Medium, and High. Choose whichever option you think will work best for you and tap “Save.” If you’re not sure which setting to choose, we recommend starting with Medium and then making adjustments from there based on how often your doorbell triggers .

And that’s all there is to it!

Conclusion

If you’re having trouble with your Ring Doorbell 2 detecting motion, it might be due to the sensitivity settings. You can adjust the sensitivity from within theRing app. Here’s how:

Open the Ring app and tap on the Devices tab. Select your Ring Doorbell 2 from the list of devices. Tap on Motion Settings.

Use the slider to adjust the sensitivity. The higher the setting, the more sensitive your doorbell will be to motion.You can also schedule when you want your doorbell to be active by tapping on Scheduling under Motion Settings.

This can be useful if you only want your doorbell to be active during certain hours of the day or night.

  As an Amazon Associate, I earn from Qualifying Purchases.

Leave a Comment