Can You Mount a Ring Doorbell Horizontally

Thomas S. Tucci

There are many reasons you might want to mount your Ring Doorbell horizontally. Maybe you have a narrow doorframe and need to make the most of the space. Or maybe you live in an apartment and don’t have a lot of vertical space to work with.

Whatever the reason, it is possible to mount your Ring Doorbell horizontally – and we’re here to show you how!

  • Position your Ring Doorbell so that the front of the device is facing you
  • Locate the two holes on the back of the Ring Doorbell labeled “Mounting Holes
  • Insert a Phillips head screwdriver into one of the mounting holes and twist clockwise until tight
  • Repeat this step for the other mounting hole
  • Hang your Ring Doorbell on the desired location horizontally and make sure it is level before letting go
Can You Mount a Ring Doorbell Horizontally


Does Ring Doorbell Need Angle Mount?

If you have a Ring Doorbell and are wondering if you need an angle mount, the answer is likely no. The vast majority of Ring Doorbells can be mounted directly to your doorframe or wall using the included hardware. However, there are a few exceptions where an angle mount may be necessary.

If your Ring Doorbell is not compatible with the Ring Video Doorbell Mounting Bracket (for example, if it has a flat backplate), then you will need to use an angle mount. Additionally, if you have an older model Ring Doorbell that is not compatible with the new wedge kit, then you will also need to use an angle mount.Angle mounts are also useful if you want to position your Ring Doorbell at an angle other than 90 degrees.

This can be helpful if you want to optimize your field of view or avoid glare from the sun.To install an angle mount, simply attach it to your doorframe or wall using the included screws and then attach your Ring Doorbell to the mount using the provided screws and anchors. Once everything is secure, just slide yourRing Doorbell into place and tighten down the screws.

That’s it! You’re now ready to start monitoring your home in style!

Can Ring Doorbell See Sideways?

No, Ring Doorbell cannot see sideways. The camera is only able to view what is directly in front of it. This is why it’s important to place the doorbell in an area where it will have a clear view of the entrance to your home.

Can Ring Doorbell Be Perpendicular to Door?

Yes, your Ring Doorbell can be installed at a 90-degree angle to your door. This is called a “perpendicular” installation, and it’s actually quite common. Many people choose to do this because it allows them to see who is coming to their door without having to open it.

There are a few things you need to keep in mind if you’re going to install your Ring Doorbell perpendicular to your door. First, you’ll need to make sure that the camera on your Doorbell is level with the peephole in your door. This will ensure that you have a clear view of whoever is coming to your door.

Second, you’ll need to make sure that the motion detector on your Doorbell is pointing towards the door itself. This way, if someone does come close to your door, the motion detector will pick them up and trigger an alert on your phone.Finally, keep in mind that installing your Ring Doorbell at a 90-degree angle means that it will stick out from your wall slightly.

This isn’t usually an issue, but if you’re worried about it being too noticeable, you can always paint it or get a cover for it.

Can I Mount My Blink Doorbell Sideways?

Yes, you can mount your Blink doorbell sideways. There are two main ways to do this. The first way is to use the included mounting bracket and screw it into the side of your doorframe.

The second way is to use the built-in keyhole on the back of the doorbell and hang it from a nail or screw.

Ring Doorbell 90 Degree Mount

If you have a Ring Doorbell, you may be wondering if there’s a way to mount it at a 90 degree angle. The good news is that there is! You can purchase a special mount that will allow you to do this.

There are a few reasons why you might want to mount your Ring Doorbell at a 90 degree angle. One reason is that it can give you a better view of who is at your door. This can be especially helpful if your door is set back from the street or if there’s something blocking the view from your current mounting position.

Another reason to consider using a 90 degree mount for your Ring Doorbell is that it can make it easier to install. If you’re having trouble getting the doorbell level when mounted in the traditional way, mounting it at an angle can often help.If you’re interested in purchasing a ring doorbell 90 degree mount, there are a few things to keep in mind.

First, make sure that the mount is compatible with your specific model of Ring Doorbell. Second, take into consideration where on your doorframe you’ll be attaching the mount. You’ll want to make sure that it’s positioned so that the camera has an unobstructed view of whoever is coming to your door.

Once you have all of these factors sorted out, choosing and installing a ring doorbell 90 degree mount is relatively straightforward. With this type of mount, you’ll be able to get the most out of yourRing Doorbell and enjoy peace of mind knowing that everyone who comes to your door will be clearly visible on camera.


If you want to install your Ring Doorbell horizontally, it’s possible, but you’ll need to use the mounting bracket that comes with the device. The process is relatively simple and only takes a few minutes. First, remove the faceplate from the doorbell by unscrewing the two screws that hold it in place.

Next, attach the mounting bracket to the doorbell using the provided screws. Once the bracket is in place, you can screw the doorbell into it. Be sure to use the longer of the two screws that come with the doorbell so that it will be secure.

Finally, reattach the faceplate and screw it back into place.

  As an Amazon Associate, I earn from Qualifying Purchases.

Leave a Comment