Can You Install a Ring Doorbell Without an Existing Doorbell

Thomas S. Tucci

If you’re looking to increase your home’s security, a Ring doorbell is a great option. But what if you don’t have an existing doorbell? Can you still install a Ring doorbell?

The short answer is yes! While it’s easier to install a Ring doorbell if you have an existing doorbell, it’s not impossible to do without one. Here’s what you need to know about installing a Ring doorbell without an existing doorbell.

  • Using the level, mark the position of the hole on the doorframe
  • Drill a hole at the marked position using a 3/4″ spade bit
  • Place the mounting bracket over the hole and use a screwdriver to secure it in place with provided screws
  • Thread the wire through ring wire slot on back of device and wrap around terminal screws clockwise until snug
  • Hand-tighten only! Do not overtighten as this may damage your device
  • 5)Snap faceplate onto device until it “clicks” into place 6)Turn power back on at circuit breaker
Can You Install a Ring Doorbell Without an Existing Doorbell


Does Ring Doorbell Require Any Wiring?

A Ring doorbell is a battery-operated device that can be installed in place of a traditional doorbell. It connects to your home’s Wi-Fi and allows you to see, hear, and speak to visitors from anywhere using the Ring app. While most Ring devices are designed for easy installation with no professional help needed, some models do require wiring.

The original Ring Video Doorbell is one such model. It must be wired to an existing doorbell system or directly to your home’s power supply in order for it to work. If you don’t have an existing doorbell or if your home isn’t wired for one, you can still install a Ring Video Doorbell by connecting it to a plug-in transformer.

The newer generation of Ring Video Doorbells (Ring Video Doorbell 2, Ring Video Doorbell Pro) come with built-in batteries that can be recharged, so they don’t require any wiring at all! You can simply remove the old doorbell from your wall (if you have one) and screw these new ones right in. These models also come with advanced features like customizable motion detection zones and pre-recorded messages that you can play for visitors.

If you want a truly wire-free experience, there are also battery-powered wireless chimes available that will work with any of the above mentioned models of Ring Video Doorbells. These chimes plug into an outlet and sync wirelessly with your ring device, so there’s no need to run any wires between the two devices. They just need to be within range of each other (usually around 100 feet).

So whether you have an existing doorbell system that needs wiring or not, there’s definitely aRing video doorbel lthat will work for you!

How Do You Install a Doorbell If You Don’T Have One?

There are a few things you need to do if you want to install a doorbell but don’t have one. The first is to find the right spot for the doorbell. It should be near the front door, close to an electrical outlet, and at a comfortable height for reaching.

Once you have found the perfect location, use a stud finder to mark where the screws will go into the wall. Then, drill pilot holes into these marks using a 1/8″ drill bit.Now it’s time to install the actual doorbell!

Begin by screwing in the mounting bracket using your pilot holes as a guide. Next, thread the wires through this bracket and then attach the faceplate. Finally, connect your wires to the transformer (making sure that you match up the correct terminals).

Your new doorbell is now installed! Just press that button and enjoy hearing whoever is at your door.

how to install ring doorbell without existing doorbell

Can You Use Ring Without a Doorbell

If you have a Ring device, you may be wondering if you can use it without a doorbell. The answer is yes! You can use your Ring device as a standalone security camera by connecting it to power and Wi-Fi.

This will allow you to access all of Ring’s features, including Live View, Two-Way Talk, and more. Here’s how to set up your Ring device without a doorbell:1. Connect your Ring device to power and Wi-Fi.

2. Open the Ring app and tap on the menu icon in the top left corner.3. Tap on “Devices” and then select your Ring device from the list.4. Tap on “Device Settings” and scroll down to the bottom of the page.

5. Toggle the switch next to “Doorbell Chime.” Your device will now work as a standalone security camera!


If you’re looking to install a Ring doorbell but don’t have an existing doorbell, don’t worry! It’s actually pretty easy to do. All you need is a power drill, screwdriver, and a few other tools.

Here’s a step-by-step guide on how to install a Ring doorbell without an existing doorbell:1) First, use the power drill to make two holes in the wall where you want to mount the Ring doorbell. 2) Next, use the screwdriver to secure the mounting bracket into the wall using the screws that come with the kit.

3) Once the bracket is secured, snap the Ring doorbell into place. 4) Finally, use the wire strippers to strip away about half an inch of insulation from each end of the included wires. Then, twist each wire around its respective terminal on the back of the Ring doorbell and tighten each one down with a screw.

That’s it! You’ve successfully installed your new Ring doorbell without an existing doorbell.

  As an Amazon Associate, I earn from Qualifying Purchases.

Leave a Comment